It can be welded with a mig but you would be better off brazing it. You
will have to be very careful with the braze because the tanks are held to
the core with solder.
-----Original Message-----
From: owner-spitfires@autox.team.net
[mailto:owner-spitfires@autox.team.net]On Behalf Of Michael D. Nugent,
Ph.D.
Sent: Saturday, September 09, 2000 7:08 AM
To: spitfires@autox.team.net
Subject: Welding steel to stainless
For somebody who knows what they're doing, would welding a radiator
filler neck (steel, I think) to a stainless steel pipe be difficult? I
want to relocate the filler on the GT8 engine to the highest point in
the system so I don't have to worry about trapped air.
--
Mike
Renton, WA - http://home1.gte.net/NugentMD/spitfire3500.htm
|