[Top] [All Lists]

Re: Welding steel to stainless

To: Greg Schluge <gschluge@cstone.net>
Subject: Re: Welding steel to stainless
From: Joe Curry <spitlist@gte.net>
Date: Fri, 22 Sep 2000 14:36:24 -0700

Greg Schluge wrote:
> It can be welded with a mig but you would be better off brazing it.  You
> will have to be very careful with the braze because the tanks are held to
> the core with solder.

It will also Spot weld together.  I used some stainless angle pieces to 
reinforce the outside edges of my floors in Huxley, by spot
welding them to the lower body seam.  Worked very well!


<Prev in Thread] Current Thread [Next in Thread>