At 02:51 PM 4/26/2001 +0000, Earl Smith wrote:
>Recently i converted Kermit to a crane ignition system(XR700 and 40,000
>volt coil) my plugs were originaly set at .025 but iwas told that the gap
>should be increased to make full use of the higher voltage.Does
>any one have any suggestions as to what the gap should be increased to?
Hi Earl,
I put an XR700 and a stock type six volt Crane coil (the PS20) on my Spit
two years ago, and have been happily running a .035 gap since then. That's
about 7,000 miles.
FWIW
Atwell Haines
'79 Spitfire
Succasunna, NJ USA
///
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
///
|