.025 is pretty wimpy by today's standards. Why, my
lawn mower uses a .030 gap!
Doug Braun
'72 Spit
At 02:58 PM 4/26/01 , you wrote:
>At 02:51 PM 4/26/2001 +0000, Earl Smith wrote:
>
> >Recently i converted Kermit to a crane ignition system(XR700 and 40,000
> >volt coil) my plugs were originaly set at .025 but iwas told that the gap
> >should be increased to make full use of the higher voltage.Does
> >any one have any suggestions as to what the gap should be increased to?
///
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
///
|