Hi Doug,
I've just remembered, I once did similar using a ball joint separater...
Cheers
Tim
Douglas Braun & Nadia Papakonstantinou wrote:
> I made a simple puller from a piece of plumbing pipe about
> 1" in diameter and 3" long, a 5" long bolt that fits through
> the hole in the bushings, and a couple of big washers and nuts.
> It removed the old bushings with no mess or hassle.
>
> It also works for installing the new bushings.
>
> Doug Braun
> '72 Spit
>
> At 06:21 AM 10/1/01 , T. .R. Dafforn wrote:
>
--
Tim Dafforn
University of Cambridge
Structural Medicine Unit
Cambridge Institute for Medical Research
Hills Rd, Cambridge CB2 2XY.
UK
Tel. (01223) 763230
Fax. (01223) 336827
http://smokeroom.cimr.cam.ac.uk/
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|