spitfires
[Top] [All Lists]

RE: shock absorber quality

To: "Will Slater" <slaterw@bluffton.edu>, spitfires@autox.team.net
Subject: RE: shock absorber quality
From: Douglas Braun & Nadia Papakonstantinou <doug@dougbraun.com>
Date: Mon, 15 Oct 2001 11:54:23 -0400
I was referring to the front shocks.  These, unfortunately
are unique to the Spitfire/Helald, and this there is less
variety available.

My car still has the original Grling DeCarbon rear shocks,
which still have gas pressure and seem fine.

Doug

At 11:17 AM 10/15/01 , you wrote:
>The Monroe shocks that a lot of people use are more expensive than $30 a
>pair.  They are air shocks for Corvette's 63-80 something. I just finished
>putting a set of these new shocks on along with a new spring the ride is far
>far better. There is a web page that describes how to use these air shocks.
>I haven't  had them long but they seem quite good. The url is
>http://www.vtr.org/maintain/airshocks-spitfire.html

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>