Ron,
Check out http://www.aptfast.com/
Click on the SU carb link in the left column. They have an assortment
of thicknesses.
Roger
Ronald R. Deaver, PMP, MCP wrote:
> Hello all,
>
> I am close to getting my 1980 Spitfire running with HS4 carbs. Preferring
> to do it right, I would like to put phenolic spacers on the carbs to cut
> heat transfer. I recall that someone mentioned that some MG models had the
> HS4 carbs stock, allowing for easy sourcing of the spacers.
>
> Can anyone point me to a source for the spacers and advise what model/year
> to order the parts under in order to get the correct spacers? It is my hope
> I can get them this next week and finally end 3 years of a non-mobile car.
>
> Regards,
>
> Ron Deaver
> White Lake, MI
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|