I've done it both ways. For the life of me, I can't remember why I found
doing it with the glass out to be a pain, but I think I did.
In any case, using a bent hacksaw blade works great and it's quite easy to
install the clips with the window in place rolled down. Honest, it is!
----- Original Message -----
From: "Paul-Ernest Levesque" <pelevesque@globetrotter.net>
Subject: Best sequence for installing Door Waist Seal and Wheatherstrip
>I am wandering If I install door waist seal and Wheatherstrip before
> installing the window with the bottom Channel then, will the window pass
> thought the window opening with the channel installed. If I lower the
> window
> down the bottom (also removing the glass rest in bottom) of the door
> first,
> then there is not much space to use a J hook between the glass and the
> window opening. Any recommendation of this subject.
> Thank you and have a very nice day
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|