JRK>koster.ncpi.com>
JRK>Hello Everyone!
JRK>I own a 71 MG Midgit and this weekend I'm going to replace the clutch slave
JRK>cylinder and the M/C. I was wondering if there is any helpful hints in
JRK>replaceing these items and the best way to bleed the system. Any
JRK>information would be of great help! I just got through putting in a new
JRK>clutch and ect. in, rebuilt the slave
JRK>cylinder and it still does not disengage in any gear. So I was told to
JRK>replace both and that should cure my problem. If any one else has any
JRK>suggestions on that I would appreciate that!
JRK>Thanks in advance to all!
JRK>Joe R. Koster
JRK>71 MG Midgit Owner
Hi joe, I too own a 71 midget. I have a bad throw-out bearing, that
gave me the same symptoms. I would check it before dumping a bunch a
money into clutch master.
My $.02
John Kahoon
71 midget
---
þ SLMR 2.1a þ john.kahoon@pcohio.com
_ _
|_|_| PC-OHIO Interactive * 216-381-3320 * telnet://bbs.pcohio.com
|_|_| Combining The Best BBS & The Web at http://www.pc-ohio.com
|