>There are only the three grease nipples you found, none on the tie rod
>ends (permanently lubricated, until they wear out).
Back in the dim mists of time, or maybe last summer, a list member
(Larry?) recommended adding a zerk fitting to the side of the lower a-arm
that was lacking. Since I have the front end up in preparation for new
bushings and brake hoses, inter alia, I'll probably do the same.
I also add grease to my permanently lubricated tie-rods via one of them
there needle thingamabob attachments. It may or may have an impact, but
it does makes me feel better.
Rich -- Council Bluffs, Iowa
'74.5 RB MGB "Miss Maggie"
'78 Chevy Half-Ton "Waltzin' Matilda" (LBC Support Vehicle)
'79 Midget "Miss Molly"
richard.arnold@juno.com or rdarnold@neonramp.com
|