spridgets
[Top] [All Lists]

Re: Maniflow LCB from APT

To: type79@ix.netcom.com
Subject: Re: Maniflow LCB from APT
From: Richard Villegas <villegas@home.com>
Date: Mon, 11 Oct 1999 17:13:54 -0700
Cc: shawn tobin <suhs2@hotmail.com>, spridgets@autox.team.net
Organization: @Home Network
References: <19991011212509.43838.qmail@hotmail.com> <3802A53A.438B98E0@ix.netcom.com>
Reply-to: Richard Villegas <villegas@home.com>
Sender: owner-spridgets@autox.team.net
Shawn,
   I have used Jet-Hot on several of my street rods. They do a very nice
job and it is lifetime work..never about rust or chipping. Money is
sometimes high dollar, but in the long run you will be more than
satisfied that you chose to have it done. They do inside and out when
they do exhaust or manifold or header. If you want some good info, just
call them and they will answer all your questions. I found them to be
honest. 

type79@ix.netcom.com wrote:
> 
> Shawn,
> Thanks for the reply.
> 
> Unfortunately, I don't have any personal knowledge of the actual Jet-Hot
> process. All I know is that the coating is durable and that the satin finish
> looks somewhat like lightly polished metal.
> 
> Since it was my desire to have lasting finishes on all components and every
> surface during the restoration of my HAN-6, this satin finish was perfect.
> 
> I had a number of pieces powder-coated and while it is certainly durable, I
> cannot tell the difference between the powder-coated pieces and those pieces
> painted with Ditzler-Deltron. They look virtually identical after 6 years of
> service.
> 
> I don't necessarily have a preference for ceramic or Jet-Hot, it really 
>depends
> on the finish one desires.
> 
> Jay Fishbein, CT
> AN-5
> HAN-6
> Innocenti-S
> Lotus 7
> (5,6,7 get it?)
> (Gearing-up for another ground up. Somebody help me.)
> 
> shawn tobin wrote:
> 
> > The powdercoating place I use uses a ceramic product on the headers.  It
> > looks amazingly like Jet-Hot.  How does Jet-Hot apply their stuff?  Is it a
> > 'powder' or a dip?  I have ceramic coating applied at te powdercoating place
> > on my exhaust and intake manifolds as well as my entire exhaust pipe.  It
> > seems very durable although my manifold cracked once because of the extreme
> > swelling it goes through during heat.  It was repaired under warranty.
> >
> > I do not want to undermine Jet-Hot as they are a good and reputable company
> > and probably have proprietary coatings.  I can only say that my local
> > powdercoater has a similar product I am happy with.  I feel lucky in that I
> > don't have to ship things off.
> >
> > ______________________________________________________
> > Get Your Private, Free Email at http://www.hotmail.com

<Prev in Thread] Current Thread [Next in Thread>