spridgets
[Top] [All Lists]

Re: 5-Speed Sierra

To: <midgetspriteclub@listbot.com>, "spridgets" <spridgets@autox.team.net>, <Daniel1312@aol.com>
Subject: Re: 5-Speed Sierra
Date: Fri, 22 Sep 2000 16:11:23 +0100charset="iso-8859-1"
References: <80.edd1bd.26fbc120@aol.com>
----- Original Message -----
From <Daniel1312 at aol.com>
To: <rob@thomasr.greatxscape.net>
Sent: 21 September 2000 20:53
Subject: Re: 5-Speed Sierra


> The Morris Minor kit at that time (but I think no longer the case) was
using
> a 1098 flywheel modified by Owen Burton.  Because I had a 1275 (in fact a
> steel pattern, lightweight) flywheel we (I worked with them on the
> installation) had a special spigot bush adaptor made as a one off (I think
it
> was a tight/interference fit).  I forget whether this was because it was
too
> large or small for the 1275 flywheel.
>
>
I have a Spridget 1275 flywheel + clutch assy, a 1300 Ital f+c assy and a
1098 late-model Spridget f+c assy on the bench.  Last chance for anyone who
wants comparable JPEG photos or measurements.  Same story with 1300 and 1275
cranks/rods/blocks.


<Prev in Thread] Current Thread [Next in Thread>
  • Re: 5-Speed Sierra, Unknown <=