spridgets
[Top] [All Lists]

Re: Ignition lock

To: "Noel, William M" <noel@BATTELLE.ORG>
Subject: Re: Ignition lock
Date: Thu, 09 Aug 2001 20:15:24 -0400
Cc: spridgets@autox.team.net
Organization: Positive Earth Drivers Club
References: <2D80B0924C1ED64FBCEBA4EF511EB8C901145189@ns-bco-mse9.im.ba ttelle.org>
I just had the same problem on a 74 Midget.
I removed the plastic column cowl and stuck in an early MG ignition switch.
I used a couple large washers and it fit the hole where the old key switch
was.
It still uses a Union key Off-on-start.
I did remove the original locking mechanism, you may have to grind slotsin the
original screw as they were made to snap off when installed.
Anti theft device.
-- 

Frank Clarici
Toms River, NJ
Lots of Sprites
http://www.exit109.com/~spritenut



<Prev in Thread] Current Thread [Next in Thread>