The ones from inside the cockpit ( what a name! ) are, but the two from
below are not.
( on this car anyway)
Robert D.
-----Original Message-----
From WFO Herb <froggi at cdsnet.net>
>If my memory serves me... aren't the bolts that secure the tranny mount
"pointed"
>on the ends, helping with alignment? Bugeye's are.
>
>
>"Charles F. Christ" wrote:
>
>> robert,
>>
>> try using an awl or a small phillips screw driver as an alignment tool.
>> start all 4 bolts and leave them loose untill you have all 4 started in
>> their threads. this will allow you the tiny bit of movement in the
mount
>> to align remaining bolt holes. if your trans mounts are a bit soft
>> initially you may have a rather distressing looking situation. but using
a
>> tool to pull the metal part of the mount into position through the bolt
>> holes will greatly ease your concerns. it's getting the drive shaft into
>> the transmission i dislike !
>>
>> chuck
|