The picture is of a 948 engine but the "lip" on the rods are the same on the
others.
----- Original Message -----
From <SDOliner at aol.com>
To: <dwalters63@home.com>; <spridgets@autox.team.net>
Sent: Tuesday, September 25, 2001 5:37 PM
Subject: Re: Piston Alignment?
> In a message dated 9/25/01 4:05:21 PM Eastern Daylight Time,
> dwalters63@home.com writes:
>
> << http://members.home.net/dwalters63/stuff.html/pistons.jpg >>
>
> Thanks for the scan. However, the pistons I have are different, no offset
and
> there is a bolt that run throught the rod and cap and a nylock not on the
end.
|
