spridgets
[Top] [All Lists]

Re: Top Troubles

To: Gary & Kathryn Bales <kgb2@centurytel.net>
Subject: Re: Top Troubles
Date: Wed, 07 Aug 2002 21:14:37 -0500
Cc: spridgets@autox.team.net
References: <3D500DB6.483A8AA@digitex.net> <00b201c23dbc$a4519070$13e4480c@ramsey> <3D508CC6.BAD88481@digitex.net> <3D51BAAF.5ADA8097@exit109.com> <3D51C582.3D0CAF32@digitex.net> <3D519FA9.F9F658FA@centurytel.net> FILETIME=[A1BF4CC0:01C23E80]
I am going to try and hook up the sides with some sort of gripping device and 
use a ratchet
strap to pull the side forward and down, it is so shrunk, the snaps are not 
close either.
Brad

Gary & Kathryn Bales wrote:

> Brad Fornal wrote:
>
> > I got the top to snap into place, now to get the sides stretched down to 
>snap. That
> > will take a little different tactic. BTW, the Texas sun IS an industrial 
>strength
> > hairdryer..............
>
> Ok, you have the hard part done. Now unfasten the front and pull it back 
>until you are
> able to fasten the sides. Then pull the top as far forward as you can and 
>leave it
> under your industrial strength top warmer for an hour or two. You should be 
>able to get
> it fastened everywhere.
> Kate

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>