Ummm... breathing fumes of galvanized steel would not be a good thing for
your long term health...
WST
----- Original Message -----
From <HealeyRic2 at aol.com>
To: <spritenut@Exit109.com>; <spridgets@autox.team.net>
Sent: Saturday, October 26, 2002 11:09 AM
Subject: Re: Cheap fix floor pans
> FWIW I just read an article in European Car about a guy using galvanized
> steel for floor pan replacement in his BMW. Article said it was a bear to
> weld and he'd never try it again. Maybe somebody with some welding
> experience can comment.
>
> BTW, for my Fiats we always used old Cinzano signs.
>
> Rick
> In a message dated 10/23/02 10:15:22 PM, spritenut@Exit109.com writes:
>
> <<These are NOT what the factory used. These are made from 22 gauge
> galvinized steel, folded up 1" on all the sides except the edge along
> the tunnel. the footwells go up 3" on the toe board.
> You can either weld or screw them in for a solid (but not original)
> replacement floor.>>
! If they include this trailer, they will NOT be sent.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|