I put complete new floor panels in mine some years ago. They were bought
in, good quality and quite thick although I don't remember the guage.
Certainly more than 20.
The footwells flex with a "clunk" when I get in and out. It annoys me but
seems to be the way things are that is all. I have wondered about
re-inforcing in some way, but done nothing. Its easier that way.
I tell myself it is a lightweight racing option!
Guy
----- Original Message -----
From "Josh" <JHa2297255 at netscape.net>
To: <spridgets@autox.team.net>
Sent: Saturday, April 19, 2003 6:30 AM
Subject: footwell floor replacement help
> I need some advice on the front footwell area. I cut out the old floor
(what was left) and made new panels from 20 ga steel. I welded these in
tonite, but I clearly should have used thicker sheet metal. THe problem is
that the center area will "depress or flex" however you define it, a bit.
This is disappointing, I spent forever cutting these!
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|