> The metal clip MUST be removed first, it has to be pried in on the long
sides,
> both of them. There are little tabs that make it more difficult, but you
have to
> clear them. Then the plastic top and bottom clips can be squeezed to let
the
> switch come out.
Of course, this only aplies to the headlight switch. At least on the 1970
Midget Willy and I took apart, each of the rocker switches used a different
technique to attach to the car.
David Lieb
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|