spridgets
[Top] [All Lists]

Re: Head , how ta CC a combustion chamber at home for fun and profit!

To: Charles Christ <cfchrist@earthlink.net>, Brad Fornal <toyman@digitex.net>
Subject: Re: Head , how ta CC a combustion chamber at home for fun and profit!
Date: Sat, 18 Oct 2003 20:28:18 -0700 (PDT)
Cc: HealeyRic2@aol.com, bugeye@yahoogroups.com, spridgets@autox.team.net, midgetsprite@yahoogroups.com
(setup for chuck here) - with or without sparkplugs?

--- Charles Christ <cfchrist@earthlink.net> wrote:
> a science class or scientific supply house.
> the tube is referred to as a burette(sp.?) tube.  a
> tiny on / off valve at
> the bottom.   use a piece of plexiglass with a hole
> drilled in it in the
> center.  smear a liberal amount of vaseline around
> the cylinder sealing area
> on the head and seat the plexiglass on the head
> using the grease as the
> sealer.  use either colored water or automatic trans
> fluid.  level head
> upside down and mark fluid level in tube at start. 
> fill up combustion
> chamber with fluid untill it is "full" with no air
> pockets showing under the
> plexiglass.  take level measurement on tube . 
> subtract new level from
> starting level in tube and *drum roll please*...you
> just CC'd a comnbustion
> chamber!  

__________________________________
The New Yahoo! Shopping - with improved product search





<Prev in Thread] Current Thread [Next in Thread>
  • Re: Head , how ta CC a combustion chamber at home for fun and profit!, Unknown <=