spridgets
[Top] [All Lists]

Re: Stock Ride Height

To: John Caffrey <jdc6@lehigh.edu>
Subject: Re: Stock Ride Height
Date: Fri, 17 Dec 2004 10:00:35 -0800
Cc: Spridgets <spridgets@Autox.Team.Net>
References: <41C2E326.6000503@lehigh.edu>
John,

Leading Dimensions specs Minimum Ride Height at 5 inches between the 
ground and the bottom of the factory exhaust pipe. This measurement 
is shown on the drawing at just slightly forward of the A-post.

Gerard

At 8:46 AM -0500 12/17/04, John Caffrey wrote:
>Did the factory ever publish a figure for ride height?  I had asked 
>this question over on the Spritespot and it went unanswered, which 
>makes me think the factory never specified ride height. Just 
>curious, but would like to predict what the R.H. will be with 1" or 
>2" lowering springs. The racers use the outer rocker panel for a 
>datum, and my Sprite used 4.25" front and 4.5" rear. How much was 
>that car lowered from stock?
>John


-- 
One meets his destiny often in the road he takes to avoid it.
~French Proverb

http://www.gerardsgarage.com/FS_Garage.htm





<Prev in Thread] Current Thread [Next in Thread>