spridgets
[Top] [All Lists]

Re: 71 Midget Trunion Pin Wear

To: "Spridgets" <spridgets@autox.team.net>
Subject: Re: 71 Midget Trunion Pin Wear
From: "John Roberts" <robe3099@bellsouth.net>
Date: Sun, 13 Aug 2006 22:23:23 -0500
Yes!  I was speaking of the threaded end.  Thanks for the bit of hope and 
good will though, Hal!

I have started applying penetrating oil to it.  Everyday for a week or so 
should do it, eh?

=D


----- Original Message ----- 
From: "David Lieb" <dbl@chicagolandmgclub.com>
To: "Hal Faulkner" <hal@katemuir.com>; "Spridgets" 
<spridgets@autox.team.net>
Sent: Sunday, August 13, 2006 8:34 PM
Subject: Re: 71 Midget Trunion Pin Wear


>> Removal of tie rod ends is EASY as I learned at the Buster Cluster. 
>> Using a
>> BFH smack the end of the steering arm along the axis of the arm.  Done 
>> right
>> and the tie rod end will fall out!  Wouldn't have believed it if I hadn't
>> seen it with my own eyes!
>
> Unfortunately, Hal, his complaint appeared to be at the threaded
> end, rather than the steering link end.
> Lots of penetrating fluid and time, I suppose...
> David Lieb
> 1972 Blue




<Prev in Thread] Current Thread [Next in Thread>