spridgets
[Top] [All Lists]

Re: [Spridgets] Vega Wheels

To: Dean Hedin <dlh2001@comcast.net>
Subject: Re: [Spridgets] Vega Wheels
From: "Glen Byrns" <grbyrns@ucdavis.edu>
Date: Fri, 6 Feb 2009 21:30:58 -0800 (PST)
I found that the rub was at the bulge of the rear axle center.  I relieved
the radius of the wheels a bit with an angle grinder until they cleared. 
The front has spridget disc brake hubs, but didn't foul at all.

Glen

> Not sure if mine were 6" Dave.  
> But they were steel and had the square holes going around the perimeter.
> I definitley remember that I had to use the spacers because the hole
> would
> hit the fillet radius on the center of the front hubs. 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>