spridgets
[Top] [All Lists]

Re: [Spridgets] Fwd: [spridgets] Bugeye Turn Signal Lens Rubber Body

To: Steven Guterman <an5.sprite@gmail.com>
Subject: Re: [Spridgets] Fwd: [spridgets] Bugeye Turn Signal Lens Rubber Body
From: Trevor Jessie <trevor.jessie@gmail.com>
Date: Fri, 25 Jun 2010 10:00:05 -0400
So the rubber "boots" he sells are different from the ones Moss and AHSpares
sells?  I was under the impression that they were all from the same
manufacturer.  Can anyone "in the know" shed light on this?

Thanks,
Trevor

On Thu, Jun 24, 2010 at 6:45 PM, Steven Guterman <an5.sprite@gmail.com>wrote:

> Thanks, the consensus recommendation is clearly Macgregor so I ordered a
> pair from them.
>
> I travel back and forth between Remsenburg and Brooklyn but the Bugeye
> stays
> garaged in Remsenburg. Seems like there may be Sprite and bugeye on LI than
> I thought!!
>
> Steve
>
> On Thu, Jun 24, 2010 at 12:56 PM, cclabaw@juno.com <cclabaw@juno.com>
> wrote:
>
> > Listers -
> >
> > There is always Holden Vintage Electric in the UK; not cheap, but pretty
> > authentic.
> >
> > CLay L.
> > ;67 Sprite
> >
> >
> > ---------- Original Message ----------
> > From: brian S <bugeye15@hotmail.com>
> > To: <an5.sprite@gmail.com>, spridgets list <spridgets@autox.team.net>
> > Subject: Re: [Spridgets] Fwd: [spridgets] Bugeye Turn Signal Lens Rubber
> > Body
> > Date: Thu, 24 Jun 2010 12:00:42 -0400
> >
> > Beautiful car Steve. You've done a fantastic job.
> > Where are located?
> > There a a few of us on Long Island if you're still here.
> > Love to see your car if you are.
> > I've restored a former racecar for street use also.
> > Consensus amongst the list is that for rubber parts,
> > the place to go is
> > http://www.macgregorukcarparts.com/
> > A couple vendors on the list  carry or can get their parts.
> >
> > Brian S.
> > Bugeyeracer finally resto'ed!
> >
> >
> >
> > > Date: Wed, 23 Jun 2010 21:23:28 -0400
> > > From: an5.sprite@gmail.com
> > > To: spridgets@autox.team.net
> > > Subject: [Spridgets] Fwd: [spridgets] Bugeye Turn Signal Lens Rubber
> Body
> > >
> > > Hello all,
> > >
> > > I am new to the list, was introduced by Linda (thank you).  I am
> > completing
> > > the conversion of my  59' Bugeye race car back to street use.  I used
> to
> > run
> > > in the 80s at Bridgehampton, LI before they closed the track.
> > >
> > > I was wondering if anyone knows where to get a good quality rubber body
> > for
> > > the turn signal lens on a Bugeye.  This is moss part number 159-600. I
> > > bought a set  from either moss or VB (too long and too many parts ago
> to
> > > remember) 3 out 4 where usable the forth will not hold the glass lens.
> > They
> > > also do not feel as firm as the originals.
> > >
> > > Thanks for the help.
> > >
> > > Steven
> > >
> > > 59 Bugeye
> > >
> >
> http://picasaweb.google.com/lh/photo/tvKOKUFm3KuVR7NCW14bbw?feat=directlink
> > > _______________________________________________
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>