I had the same problem, plus the seal I bought was way too stiff. Ended up not
using it and buying a universal fit weather strip that was flat on the bottom
with double stick tape and had a hollow foam 1/2 circle on top.
Steve
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: "Mark Haynes" <haynes386@netzero.net>
Sender: spridgets-bounces@autox.team.net
Date: Tue, 24 Aug 2010 14:04:54
To: <spridgets@autox.team.net>
Subject: [Spridgets] BE Bonnet seal
I just bought a bonnet seal from Sports & Classics for Chips (the'58)and
installed it in the cowl channel last night with the V-groove upwards. When I
close the bonnet, it's WAY too tall (~3/8" above the cowl). I remember someone
had this issue last year, so I thought that I'd ask the pertinent questions-1)
Did I install this wrong? and 2) How much needs to come off the backside of
the seal to fit correctly?
Mark Haynes
HAN6L12779
HAN5L8016
____________________________________________________________
Obama Urges Homeowners to Refinance
If you owe under $729k you probably qualify for Obama's Refi Program
http://thirdpartyoffers.netzero.net/TGL3231/4c73d1de7ddd681c62fst03duc
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/an5.sprite@gmail.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|