I'm just curious ...
Has anyone tried MacGregor's seal? If so, how did it fit?
http://preview.tinyurl.com/2b3jdly
Robert Duquette
Ottawa ON Canada
> From: an5.sprite@gmail.com
> I had the same problem, plus the seal I bought was way too stiff. Ended up
not using it and buying a universal fit weather strip that was flat on the
bottom with double stick tape and had a hollow foam 1/2 circle on top.
>
> Steve
> -----Original Message-----
> From: "Mark Haynes" <haynes386@netzero.net>
>
> I just bought a bonnet seal from Sports & Classics for Chips (the'58)and
> installed it in the cowl channel last night with the V-groove upwards. When
I
> close the bonnet, it's WAY too tall (~3/8" above the cowl). I remember
someone
> had this issue last year, so I thought that I'd ask the pertinent
questions-1)
> Did I install this wrong? and 2) How much needs to come off the backside of
> the seal to fit correctly?
>
>
> Mark Haynes
> HAN6L12779
> HAN5L8016
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|