That was one of the two I tried.. Moss and MacGregor's.. can't tell
'em apart and they both have the same fit.
Lester
On Aug 24, 2010, at 12:28 PM, Robert Duquette wrote:
> I'm just curious ...
> Has anyone tried MacGregor's seal? If so, how did it fit?
> http://preview.tinyurl.com/2b3jdly
>
> Robert Duquette
> Ottawa ON Canada
>
>
>> From: an5.sprite@gmail.com
>
>> I had the same problem, plus the seal I bought was way too stiff.
>> Ended up
> not using it and buying a universal fit weather strip that was flat
> on the
> bottom with double stick tape and had a hollow foam 1/2 circle on top.
>>
>> Steve
>
>> -----Original Message-----
>> From: "Mark Haynes" <haynes386@netzero.net>
>>
>> I just bought a bonnet seal from Sports & Classics for Chips
>> (the'58)and
>> installed it in the cowl channel last night with the V-groove
>> upwards. When
> I
>> close the bonnet, it's WAY too tall (~3/8" above the cowl). I
>> remember
> someone
>> had this issue last year, so I thought that I'd ask the pertinent
> questions-1)
>> Did I install this wrong? and 2) How much needs to come off the
>> backside of
>> the seal to fit correctly?
>>
>>
>> Mark Haynes
>> HAN6L12779
>> HAN5L8016
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/spridgets/oldsaabguy@comcast.net
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|