spridgets
[Top] [All Lists]

Re: [Spridgets] Fuel sucking vacuum problem on Pinky youtubes to

To: corvallis@peoplepc.com
Subject: Re: [Spridgets] Fuel sucking vacuum problem on Pinky youtubes to
From: Linda Grunthaner <grunthaner@gmail.com>
Date: Sun, 10 Oct 2010 09:06:31 -0400
Bill,
I did a search and could not find FLAPS but found these below. Then I got to
thinking I love to know exactally what my little car is doing and love
gauges, so I want to install some extra gauges under the dash just in front
of the shifter (I would love to be brave and cut my dash like Frank did but
not for Pinky) would there be a psi gauge I can attach permanently fore fuel
psi? if so would that connection be a tube permanently mounted before the
carburetor and will that effect flow to have on all the time?
Lin

Fuel Pressure Gauge in dash type
*http://tinyurl.com/24zxdrh

Sears hand held gauge
**http://tinyurl.com/2cwrzuo*

On Sun, Oct 10, 2010 at 8:35 AM, <corvallis@peoplepc.com> wrote:

> Check eBay for pricing of ... fuel pressure gauge 15
> So they're probably also available at FLAPS. You'll also need some
> fittings.
> Keep us posted. ...bill
> ========================================
> -----Original Message-----
> From: spridgets-bounces@autox.team.net
> [mailto:spridgets-bounces@autox.team.net] On Behalf Of Linda Grunthaner
> Sent: Sunday, October 10, 2010 5:16 AM
> To: WeslakeMonza1330@aol.com
> Cc: spridgets@autox.team.net
> Subject: Re: [Spridgets] Fuel sucking vacuum problem on Pinky youtubes to
> follow.
>
> Weslake-Monza1330,
> Thanks that is exactly what Jim said, run till it stops then check the
> bowls
> for fuel which looks like the easiest test. I also like the gauge idea at
> the carb thanks Steven, but that would mean $$ which I still may invest if
> I
> can find one, (any ideas?) wow what a cool and useful gauge to have, I love
> gauges especially analog.
>
> As for the cap rotor and coil, I am not experienced with them but now is
> the
> time to learn even if it is only fuel/pump I would like to learn how to
> test
> these electric parts and set points as well as understand how they work. So
> this is a good opportunity for me to learn more ; ) I'll try the bowls test
> first and then get back to you all on my findings and try and get  a
> youtube
> for the test too as it is good for me and others to remember what we have
> learned via my videos because they are all labeled on my account.
>
> If it is the pump that will be my 3rd electric pump in 4 years (all USA
> made
> not Mexico or China)  think I want to go back to a mechanical pump is this
> advised? If it is not the pump I will be learning how to test coil, cap,
> wires & rotor. Also I'll get that RED colored rotor arm (where do I find
> the
> RED ones?).
>
> Let the learning begin.
>
> Thanks again to all.
> Linda
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>