spridgets
[Top] [All Lists]

Re: [Spridgets] Temperature probe adapter

To: Hal Faulkner <frog.aye@gmail.com>
Subject: Re: [Spridgets] Temperature probe adapter
From: derf <derf247@gmail.com>
Date: Tue, 7 Jun 2011 19:39:21 -0500
They probably used an adapter to facilitate the use of an off the
shelf probe.  You can just drill and tap the head.
You'll have less corrosion with a brass part going into a cast iron
part than you would steel/iron or steel/Aluminum.
You probably want to get the probe bulb in the H2O without restricting
the flow too much.
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>