The panel it double wall and a magnet larger than a quarter wwill not fit.
Doug
-----Original Message-----
From: Steve Laifman <laifman@flash.net>
To: SDeane7000 <SDeane7000@aol.com>
Cc: steve@ramus.com <steve@ramus.com>; tigers@autox.team.net
<tigers@autox.team.net>
Date: Sunday, March 08, 1998 6:47 PM
Subject: Re: Lettering
>
>
>SDeane7000 wrote:
>
>> Steve & Doug,
>>
>> How about a poor man's magnaflux? Would a magnet on the back side of the
hood
>> and some iron filings on the front indicate the holes??
>>
>> Scott 3821001187
>
>Great idea, Scott. I would recommend a "powder" over filings, and would use
>something like Saran wrap on the paint side to keep the iron away from the
paint
>surface. Can't use a "puny" magnet though. Try a discarded Big Speaker
magnet.
>You might want to put a big handle on it, so you can get it off the inside
>without a come-a-long. Another thin sheet of conforming aluminum, between
the
>magnet and the inner steel might allow a prying action to "break" the hold.
>
>Steve
>
>
>--
>Steve Laifman < One first kiss, >
>B9472289 < one first love, and >
> < one first win, is all >
> < you get in this life. >
>
>
>_/_/_/_/_/_/_/
> _/ _/_/_/ _/_/_/ _/
> _/ _/ _/ _/ _/ _/ _/_/_/_/
> _/ _/ _/ _/ _/ _/ _/
> _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> _/
> _/_/_/
>
>
>
|