On my engine with Crane Roller Rockers and the 460 lift cam the rocker arm
hits not just the nut. I had to remove the baffles and mill some of the valve
cover
for clearance. Never tried adding oil with the engine running ......
Doug
Steve Laifman wrote:
> Scott Lampert wrote:
>
> > > rick at S.S. has them . i have seen the one's at cat and ricks are
> > > better. if you are running roller rockers or plan on it, order them
> > > without the baffels. i am running ricks covers with cobra type roller
> > > rocker and have on problems.
> > >
> > > scott
>
> Scott, and Tigers,
>
> I would NOT remove the baffle in the valve cover, it serves a functional
> purpose. Or never open the oil filler when the motor is running.
>
> There is another solution that is better, and doesn't interfere with the
> purpose of the shield.
>
> Using a hole saw on your drill, just cut clearance holes for the cap nut
> on the rocker in the places they interfere. This lets them stick through,
> stops interference, and doesn't upset the shield function.
>
> Steve
>
> --
> Steve Laifman < Find out what is most >
> B9472289 < important in your life >
> < and don't let it get away!>
>
> _/_/_/_/_/_/_/
> _/ _/_/_/ _/_/_/ _/
> _/ _/ _/ _/ _/ _/ _/_/_/_/
> _/ _/ _/ _/ _/ _/ _/
> _/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> _/
> _/_/_/
|