Re: Door Hinges

[Larry Paulick <larry.p@erols.com>]

Those hinges are tough to remove.  Paint is not a problem,  but rust
between screw and hindges is.  Soak with WD-40 for several days, tap
with hammer, each day, and buy an  impact screw driver.  It has a
phillips head, and at the other end, you hit it with a hammer, and it
turns screw, with damage to screw head.

Pins can be obtained from body shops, or their suppliers, but you may
have to fabricate a new pin.  Also check with Rick, or Curt for usedhingess.

Good Luck

Larry