cloverdale wrote:
> My car has a three position panel lamp switch. The three positions are off,
> low and high. The switch has a block resistor that clips onto contacts on
> the switch. The switch looks like a match otherwise to all the other
> switches that came with my car. As far as I can tell this type of which is
> not indicated in the schematics for Tigers are Alpines. What is this? Did
> some Tigers or other Rootes cars use this? Is this typical on Tigers
> despite the wiring diagram?
>
> Frank
> B9471116
Frank,
The only switches that have three positions are the headlight switch and the
heater blower switch. Non have a resistor, although there is a fairly large
resistor in line with the fan to give your dual speeds, it is not part of the
switch. Sounds like you have something from another car. The correct panel
lamp
has only two positions, "off " and "not working". {9->
Steve
--
Steve Laifman < Find out what is most >
B9472289 < important in your life >
< and don't let it get away!>
_/_/_/_/_/_/_/
_/ _/_/_/ _/_/_/ _/
_/ _/ _/ _/ _/ _/ _/_/_/_/
_/ _/ _/ _/ _/ _/ _/
_/_/_/_/_/__/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
_/
_/_/_/
|