Re: Clutch Help

To:	csquared@idsi.net, tigers@autox.team.net
Subject:	Re: Clutch Help
From:	SFordRB@aol.com
Date:	Thu, 9 Aug 2001 13:16:00 EDT

First, make a visual inspection of the bores, if any significant scratches or 
gouges can be seen, you may be better off ordering new units through Rick, 
Kurt or Cat (if you are a member). A damaged bore on the cylinders will need 
to be re-sleeved. If you re-sleeve make certain that they use brass sleeves 
to reduce electrolysis.

Dr Moonstone

<Prev in Thread]	Current Thread	[Next in Thread>
Clutch Help, Clifford A. Costa RE: Clutch Help, Allan Connell, Jr. Re: Clutch Help, SFordRB Clutch Help, Clifford A. Costa RE: Clutch Help, Bob Palmer Re: Clutch Help, SFordRB <= Re: Clutch Help, Steve Laifman Re: Clutch Help, TIGEROOTES Re: Clutch Help, TIGEROOTES RE: Clutch Help, Allan Connell, Jr. RE: Clutch Help, Bob Palmer Re: Clutch Help, Steve Laifman Re: Clutch Help, Steve Laifman Re: Clutch Help, SFordRB

Previous by Date:	RE: 260 vs. 289, Tom Hall
Next by Date:	Re: Clutch Help, Steve Laifman
Previous by Thread:	RE: Clutch Help, Bob Palmer
Next by Thread:	Re: Clutch Help, Steve Laifman
Indexes:	[Date] [Thread] [Top] [All Lists]