tigers
[Top] [All Lists]

RE: Electrical gauge and oil pressure

To: "'Steve Laifman'" <SLaifman@SoCal.rr.com>
Subject: RE: Electrical gauge and oil pressure
From: "Ronak, TP (Timothy)" <Timothy.Ronak@AkzoNobel.com>
Date: Tue, 4 Jun 2002 11:36:56 -0400
I got the standard water pump from Rick at Sunbeam specialties and just
removed it from the old 260 and bolted it onto the 350. Apparently Rick has
upgraded the impeller with a disk that helps the pump to flow coolant. It is
the riveted on disk you will see. It is stock replacement.

Best Regards,

Tim Ronak
Business Development Manager
Akzo Nobel Coatings
OFF: (949) 305-5393
VM: (800) 234-6747 ext. 2257#

 -----Original Message-----
From:   Steve Laifman [mailto:SLaifman@SoCal.rr.com] 
Sent:   Monday, June 03, 2002 10:46 PM
To:     Ronak, TP (Timothy)
Subject:        Re: Electrical gauge and oil pressure

Tim,

Like I asked, did you get the standard pump, or the high flow pump!
-- 
____________________________
Steve Laifman
Editor
<http://www.TigersUnited.com>

<Prev in Thread] Current Thread [Next in Thread>