tigers
[Top] [All Lists]

RE: T10 Transmission

To: "Wally Menke" <wallym@ozemail.com.au>
Subject: RE: T10 Transmission
From: "Dan & Lori Fitzgerald" <danlorifitz@earthlink.net>
Date: Tue, 5 Aug 2003 10:30:57 -0400
Wally,

I have an original T-10 in my Tiger and the model number and tag number
matches what I have.  The speedo cable connection should however be on the
left side, next to and on the same side as the shifter assembly.  If you are
restoring B9471793, I would use a Top-loader transmission they are much
easier to rebuild and get parts for and is correct for your number car.

Dan Fitzgerald
B9470033


>Hi Folks
>
>I've just been pulling all the bits out of a second Tiger I have here and
>found that the transmission that came with the car is not the original
>Toploader but a T10. The bolt patttern looks like it will fit the standard
>bell housing, but the tail housing looks a bit shorter than the stock Tiger
>one. The speedo connection is on the rights side instead of the left.
>
>The code cast on the side of the box is as follows:
>
>T10B-1
>W.G  DIY
>W1
>Serial number on tag: 30A-G-1
>
>Can any of you Ford followers tell me what this is off?, and if it will fit
>the Tiger?
>I remember reading that the original early batch of Tigers had this
>transmission?
>
>Regards
>Wally Menke
>B9471793
>
>
>

--

Steve Laifman
Editor
http://www.TigersUnited.com

<Prev in Thread] Current Thread [Next in Thread>