I have a "world class" T-5 with 2.95 first gear and .80 overdrive 5th. Rear
is 3.73 posi runnning 2.25 VR 40 X 16 Yokohamas. Gives super acceleration
out of the hole and cruises about 2600 RPM at 60 mph in 5th. Runs behind
322 ci "stroker" with Crower roller cam of .597 lift and 292 duration. In
spite of cam, it pulls really good at lower rpm due to individual runner
induction with 4 Weber IDA 48's and will idle at 750 RPM.
----- Original Message -----
Sent: Friday, December 10, 2004 2:19 PM
Subject: Re: Rear End Gear Ratios
> Hi Everyone,
> I've been wondering what people on the list run in their Tigers for rear
> gear ratios.
> I know there are some variables such as 4-speed or 5-speed, close or wide
> ratio and stock versus modified engines. However, I'm hoping people will
> their different setups and whether they hate, like or love them.
> Thank you.