tigers
[Top] [All Lists]

Re: [Tigers] tach help

To: tigers@autox.team.net
Subject: Re: [Tigers] tach help
From: garywinblad@comcast.net
Date: Thu, 18 Feb 2010 14:14:08 +0000 (UTC)
Theo's kit works great with the MSD box, you use the "Tach Out" and use
the "Voltage trigger" (a new wire from your rebuilt tach).

Gary

----- Original Message -----
From: Tom Hall 
To: michael king 
Cc: tigers@autox.team.net
Sent: Thu, 18 Feb 2010 05:32:17 +0000 (UTC)
Subject: Re: [Tigers] tach help

At 03:09 PM 2/17/2010, you wrote:
>A few weeks back someone (maybe tom hall) posted a part number for a module
>that you use with the multi pulse elec igntion systems to get the tach to
>work.. i cant find it.. anyone save that?
>Regards, Michael King

Theo and I offer a PCB that replaces 100% of the electronics in the 
OEM Tach and allows it to work with all known aftermarket ignitions 
using their 5 volt pulse signal.  I don't know how well the MSD 
works, as I've never tried one.  One of the things the MSD unit can't 
do is fix the 40 year old electronics in the OEM Tach instrument.  If 
your Tach works great under all conditions, the MSD adapter should 
fill the bill.  If however your tach exhibits the common temperature 
sensitivity and other odd assorted problems, the replacement board we 
offer is a more permanent long term solution.  We also offer the 
calibration service to go with the board so that when you get it 
back, it reads correctly (or as accurate as the mechanical movement 
allows).  Contact Theo ("Theo Smit"  ) or I 
for further information.


Tom Hall
ModTiger Engineering LLC
www.tigerengineering.net
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Tigers@autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>