tigers
[Top] [All Lists]

Re: [Tigers] Engine help, 302

To: <tigers@autox.team.net>
Subject: Re: [Tigers] Engine help, 302
From: "Thomas Witt" <atwittsend@verizon.net>
Date: Mon, 25 Oct 2010 23:30:32 -0700
Tom,

Regardless of any advance/retard ground into cams or similar with timing 
chain index points, it is always best to degree in a cam. It helps take the 
mystery out of the "variables."  Although..., when chains stretch, and valve 
lash clearances get altered it kind of throws out the "spot on" aspects.

FYI, I indexed and then measured actual values on a PAW clone of an 
Edelbrock cam.  This is what I got:
Spec-ed 204/.420, - actually measured  208-210/.424 The ramp was so slow 
that the extra degrees likely didn't matter.

Regards, (another) Tom

> 2) I read that the "stock" timing chain and gears are retarded for
> pollution control. My chain and gears are a double row set with E3AE-A3A 
> on the
> gear. Any thoughts?
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>