Dan,
You might consider spending a bit of time with the Fiero wiring diagram; the
answers to your questions might be in there. I'm assuming, of course, that
the Fiero had the functions you're looking for built into the car that
donated the steering column.
Tom
On Tue, Nov 30, 2010 at 12:59 PM, steve wick <srwick@hotmail.com> wrote:
> 1969/70 Mercury Cougars used a circuit board that plugged into the harness
> at
> the plug to the wiper motor, used the standard wiper motor and had a switch
> that replaced the standard one at the dash. That's probably what he's
> talking
> about.
>
> Steve
>
> > Date: Mon, 29 Nov 2010 22:59:26 +0000
> > From: deiland1@elp.rr.com
> > To: JENSEN-cars@british-steel.org; deiland1@elp.rr.com
> > CC: tigers@Autox.Team.Net
> > Subject: Re: [Tigers] Wiper Delay ? Not Tiger Related but Jensen Related
> >
> > As soon as I posted this email, a local mechanic that has worked on my
> regular cars for years called me and I discussed the subject with him. He
> seems to think it might be possible to do what I'm thinking and have it
> work
> correctly. Although he feels more confident that I could definitely operate
> the high and low speeds from the column switch and the washer from the
> column
> switch, he didn't discount that I could possibly get the delay function to
> work as well. His thoughts were that I may have to find an older circuit
> board
> that operated an older two speed wiper motor and controlled the delay
> operation also. If I understood him correctly, he was saying that in some
> newer cars the circuit boards operate a wiper motor that has the delay
> function built into the newer motors. Of course I may not be understanding
> what he was talking about. Still like to hear what others on the lists have
> to
> say.
> >
> > Dan Eiland
> >
> >
> >
> > ---- deiland1@elp.rr.com wrote:
> > > I converted my Jensen Healey steering column to a Pontiac Fiero tilt
> steering column and would like to take advantage of the new turn signal
> lever
> with wiper delay and washer switch. I suspect I can find a wiper delay
> circuit
> module that should plug directly into the existing wiring harness on the
> new
> tilt column. The question I have is whether it will work correctly if I
> wire
> the module into my original two speed JH wiper motor. Of course the delay
> should only work on the low speed side of the original wiper motor while
> the
> high speed side should be unchanged. Anyone out there have an idea if this
> will work on an old LBC wiper motor?
> > >
> > > TIA,
> > > Dan Eiland
> > > 1974 JH Project Car
> > > Ex Tiger Owner
> > > _______________________________________________
> > > Tigers@autox.team.net
> > > Donate: http://www.team.net/donate.html
> > > Archive: http://www.team.net/archive
> > > Forums: http://www.team.net/forums
> > > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/deiland1@elp.rr.com
> > _______________________________________________
> > Tigers@autox.team.net
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/srwick@hotmail.com
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|