Got it.
Those go between the mounting bracket and the body of the car on the REAR
bumper. You will not that the threaded hole is recessed from the body panels
on the rear. Those spacers prevent the bracket from mashing the body panels
flat in that area.
Erich
---- Rollright@aol.com wrote:
> Hello,
>
> To clarify on the bumper hardware, I got several replys indicating that I
> misled some folks. In the spirit of clarity:
> No not those pieces that are curved (to mate with bumper) on one side and
> flat on the other.
>
> This is a little barrel affair with a hole in the middle, 3/4" long, an
> inch in diameter and a half inch hole in the center drilled through the 3/4
> inch dimension.
>
>
>
>
> Jim
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|