Tim:
Please have a look at:
http://www.bresco.com/acatalog/Brake_and_Fuel_Hardware.html
I believe the part you seek is Ref: BSF403P
Cheers,
Wayne
-----Original Message-----
From: tim [mailto:crabco@shaw.ca]
Sent: Tuesday, May 22, 2012 3:12 PM
To: tigers@autox.team.net
Subject: [Tigers] Balance pipe nipple thread
Listers,
The parts book calls for a 1/2" UNF tube with a compression sleeve where the
fuel line meets the balance pipe. I went through this with my Alpine and as
I recall, the 1/2" UNF tube nut worked fine.
The balance pipe I have for the Tiger seems to have a different thread. My
local supplier was stumped and said it almost looks like a Whitworth thread.
Does anybody have insight into this? I bought the pipe on EBay as the
original was trashed so it possibly came from a different model? I guess I
could cut the nipple off and weld on a new one or find a different pipe
altogether but I am still puzzled by this.
Thanks,
Tim
_______________________________________________
tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/tigers-archive@autox.team.net
|