Don,
Should Derek start at the front bumper and work toward the rear or the rear
and work toward the front???
Mark
----------
> From: Don Sforza <dsforza@megahits.com>
> To: Triumph List <triumphs@autox.team.net>; Matrix1643@aol.com
> Subject: Re: TR3 advice
> Date: Thursday, September 18, 1997 7:11 PM
>
> Gee, Derek, that's easy... tear it apart, replace every part that even
"looks"
> worn out, and put it back together. Paint every little nook and cranney
> (especially the crannies), and polish all the brass and aluminum to a
high
> sheen... don't forget to clear coat everything. Take every suggestion and
don't
> let the money stop you.
>
> In your spare time, hook up with a good divorce lawyer (preferably one
that can
> do a bankruptcy action as well)... you'll need it!
>
> "And to think, it all started with a tractor!"
>
> Don Sforza dsforza@megahits.com KA1WV
> 1963 TR4 Connecticut Triumph Register CT16707L
> Southington, Connecticut
>
> ----------
> > From: Matrix1643@aol.com
> > To: triumphs@autox.team.net
> > Subject: TR3 advice
> > Date: September 18, 1997 9:56 PM
> >
> > Hello everyone,
> >
> > This is just about my first time to actually post on the list, although
I've
> > been reading for quite some time. I am just now starting the complete
> > restoration of a '60 TR3 and was wondering if anyone had advice for how
to
> > get starting on this particular car. I have the equipment and
knowledge to
> > fix almost everything...just wanna know how to get started. I'd
appreciate
> > any advice you can give.
> >
> > Thanx,
> >
> > Derek
> >
> > '60 TR3 TS 67917 L
|