triumphs
[Top] [All Lists]

Alignment Specs for Spitfires

To: Triumphs <triumphs@Autox.Team.Net>
Subject: Alignment Specs for Spitfires
From: Vic Whitmore <vicwhit@octonline.com>
Date: Wed, 24 Sep 1997 10:08:30 -0400
I've lost the message from someone that asked for alignment specs for a
Spitfire. So to whoever needs this, here they are from the 1500 Repair
Operation Manual from BL Cars Limited (copy of original print).

Front end:
             Empty Condition                  2 people equivalent
Camber      3 degrees positive +/- 1 degree   2 deg. Pos. +/- 1/2 deg.
Toe-in      1/16" to 1/8" in. IN              0 to 1/16' in. IN

Rear
Camber      1 degree negative +/- 1 degree    3 3/4 negative +/- 1 deg.
Toe-in      1/32 to 3/32 in. OUT              0 to 1/16 in. IN

Note on rear camber: If you are greater than specified, check spring
bushings for wear/looseness then for sagging spring.
Note on front alignment: Do camber adjustment first as this will
directly affect the toe-in.
Remember to roll car back and forth several feet between adjustments to
settle tires into new position.

Good luck!

Vic Whitmore
76 Spitfire
Thornhill, Ontario
Just send money.....it works for me!

<Prev in Thread] Current Thread [Next in Thread>