Lewis,
According to my sources (parts manual), the hole to the left of the
tach is for the ignition switch, and the hole to the right of the speedo
is the "Lighting & Illumination Master Switch". The upper hole between
the tach and speedo is the "Flasher Warning Light" (turn signals??). My
dash is apart also, so if this is incorrect, I'm *SURE* I will be
suitably corrected! Offhand, I can't help you with the speedo reset
holes. Good luck,
Peter
-----------------------
lewis mckillop wrote:
>
> Hello again,
> I am putting the instrument cluster together in my 63 spit. Other than
> the four gauges in the panel there are two holes in it. One for ignition
> switch, one for (another switch?), and one for an indicator light for
> something. Could someone tell me what system the indicator light is for
> and what the other switch is for?
> Also, on the piece the odometer trip reset button is attached to
> there is a place for another switch. What is this switch for?
> Thanks again,
> Lew 63 and 67 spit
|