Robert Laing wrote:
> I was curious if anyone has tried to refinish thier TR6 dashboard.
> The wood seems to be in good shape, but the finish is cracking. What
> concerns me about refinishing the dash is that the wood surface may be
> very thin and it may be damaged while sanding down the finish. Thank you
> for any advice.
> Robert Laing
> 1976 TR6
If the wood looks good underneath the finish, you might get away with
removing the finish with any number of chemical removers available from
woodworking stores. Ask a clerk in one of those stores to see what he
recommends for that. There are plenty pieces of antique furniture that
have very thin veneers. So surely there are finish removers that will
allow the exposure of the wood without damage. (I have seen them do it
on TV, so it must be true)
Joe Curry '63 Spit