Re: extra wire in TR3A wiring harness

[Jim Bauder <jimbpps@att.net>]

Ken,

Just finished wiring this on my '58 TR3.

The large ringed Black wire goes on the front wiper motor mounting frame
bolt, as a ground. The small ringed wire goes to the small screw on the
wiper motor near the power leads. I believe that these two wires are
actually the same wire. The Green with Black go on the bottom terminal
of the motor and the two Green wires go on the top terminal.

Good luck,

Jim Bauder
'58 TR3 in fewer and fewer boxes
Palo Alto, CA