I also have a bonnet like this. I didn't use it on my car because it seemed
wider
than it should be, but it's probably just spread from lack of the rib at the
back.
TR3197@aol.com wrote:
> I have a bonnet (hood) that has no lip on the trailing edge. This is the
> first time I noticed this on a TR3A hood.
>
> I checked it dimensionally with other hoods and the dimension was correct.
> The edge appears die cut with no roughness or irregularity. What gives? I
> would be surprised if it came from the factory this way, but it looks like it.
>
> It is for sale and I dont want to send it to some unsuspecting person. It
> might be a good one for a Vintage racer, though. It will be very cheap.
>
> Anyone know anything about this.?
--
George Richardson
The Wyvern - '57 Triumph TR3, TS15559L - http://www.merlingroupinc.com/tr3.htm
The Hippogrif - '71 Triumph Stag MKI, LE8176E - soon to get a site of it's own
Kitty - '83 Jaguar XJ6 Vanden Plas - Undergoing repair
|