HI Frank
Try quoting Audi 80 or any vehicle with the Bosch K-jet(tronic) injection
this system required slightly less pressure (circa 80 psi) than the PI
(100-110 psi) though I have had two of these pumps as I thought one was
faulty it turned out to be the installation, these pumps will not draw
through the Lucas prefilter they must be post filtered with a high pressure
filter. The pumps seem capable of running this pressure (and more as I
turned up the PRV and it kept pumping).
Graham.
----- Original Message -----
From: Biedermann, Frank (SSABSA) <frank@ssabsa.sa.gov.au>
To: triumphs <triumphs@autox.team.net>
Sent: Monday, March 13, 2000 6:38 AM
Subject: Bosch fuel pump conversion for TR6 PI
>
> For those of you who have done the above conversion,
>
> Could any of you please give me a Bosch part number for a high pressure
> fuel suitable for use with the above conversion. I have a pump which (I
> believe)
> will put out the required pressure, but the Bosch hotline people over here
> are quite unhelpful with respect to finding part numbers of things like
> fuel filters for you (me). One filter I know will work is 0450 905 145,
but
> Bosch Australia doesn't seem to have that part number on its books, even
> though it's listed on the website in Germany as a part for an Audi
Quattro.
>
> Thanks in advance,
>
>
> Frank Biedermann
> 69 TR6 PI
> Adelaide
> AUSTRALIA
>
>
>
|