Paul, thanks. That is correct. My book was already corrected (by me -
although I don't remember making the correction :-)). Recommend the other
Haynes owners make the correction also. You know --- roadside tweeking is
not the time to figure it out . Cheers.
Art Kelly
At 12:00 PM 5/12/2000 , Z27407@aol.com wrote:
>
>List
>Remember that if you are going by the Haynes Manual for TR 2-4a, for
>tightening valves, the sequence in the manual has a typo..
>
>On page 48, the sequence for adjustment shoule be..
>
>Valve Fully Open Check and Adjust
>#8 #1
>#6 #3
>#4 #5
>#7 #2
>#1 #8
>#3 #6
>#5 #4
>#2 #7
>
>My Hanyes book is rather old and the new reprints may have corrected the
>error that is listed as..
>
>Valve fully open Check and Adjust
>#7 #8
>#1 #8
>
>Obviously # 8 is listed twice and if you go by the manual, you may not check
>and adjust #2..
>
>Good Luck
|